POLARIS RANGER 1000 CREW CAB (2018-CURRENT) SLIMSPORT ROOF RACK KIT

Product Discription

Turn your Polaris Ranger 1000 Crew Cab (2018-Current) into the ultimate off-road adventure vehicle by adding a Roof Rack to easily transport all your cargo. The highly versatile Slimsport Roof Rack from Front Runner is lightweight and low-profile Slimsport Roof Rack and can be customized with over 55 accessories so you can transport everything from jerry cans and recovery kit to camping and fishing gear

Info

• This low-profile flat deck Slimsport rack has a load-carrying area of 1559mm (61.4") L x 1238mm (48.7") W.
• The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
• The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
• Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately).
• The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
• Need a lightbar? The optional lightbar fairing Polaris Ranger UTV (2018-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
• Fitment guide and all mounting hardware included.
• 6"/T30 Torx Allen Key for Slimsport Rack 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
• Note: Drilling required.
• Note: Under Rack Tables are not compatible with the Slimsport rack kit range
• Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.

* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Specs

KSPR003T - Polaris Ranger 1000 Crew Cab (2018-Current) Slimsport Roof Rack Kit

Consisting of:
1x KSPR002 - Polaris Ranger 1000 Crew Cab (2018 - Current) Slimsport
1x RRAC243 - Polaris Ranger 1000 Crew Cab(18-Curr)Ssport WindFairing
1x RRAC971 - Protection Strip

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Rack Kit Dimensions:
1577mm(62.1") L x 1244mm(49") W x 184mm(7.2") H

Approximate Installed Weight: 23.01kg (50.73lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

Shipping Dimensions:
Width: 330mm (13")
Length: 1696mm (67")
Height: 210mm (8")

Shipping Weight:
Weight: 27.38kg (60lbs)

Installation Instructions